CONFIGURING X-LITE version 3 After downloading and installing X-Lite, follow the directions below to configure X-Lite for Callcentric. The configuration is the same for X-Lite on Windows and Mac OS X.

We recommend that you read each step through in its entirety before performing the action indicated in the step.     STEP 1

Open the X-Lite application.

STEP 2

If you have had X-Lite installed for a while please skip to 2B below. STEP 2A

If you have just installed X-Lite you will see a screen appear like the one below:



If you see this window skip to STEP 3, if not, see 2B below.

STEP 2B

If you have had X-Lite installed for a while please RIGHT-CLICK in the main window and select SIP Account Settings... from the drop-down menu.



STEP 3

Click the ADD... button in the SIP Accounts window.



STEP 4

You will now see a window with tabs across the top, and fields to be filled. Follow the directions below for how to fill the fields within each tab.



STEP 5

Within the Account tab fill in the fields as explained below:


FieldSetting Display Name:Enter your name in this field Username:Enter your Callcentric number here (your Callcentric number starts with 1777 and has an additional 7 digits) Password:Enter your SIP Password here. Your SIP password is the same password you create when you sign up for you Callcentric account. Optionally you may change it in your preferences. Authorization user name:Enter your Callcentric number here (your Callcentric number starts with 1777 and has an additional 7 digits) Domain:Enter callcentric.com in this field

In addition the Register with domain and receive incoming calls option should be CHECKED; and the target domain radio button selected.

The dialing plan should be left as its default which is: #1aa.T;match=1;prestrip=2;

Below is an example:



Once done please click the Apply button; then click on the Topology tab

STEP 6

Within the Topology tab make sure that the settings are configured as shown in the picture below:



Once setup as above, click the Apply button (if you made any changes), and then click the Advanced tab.

STEP 7

Within the Advanced tab make sure that the settings are configured as shown in the picture below:



Once setup as above, click the Apply button (if you made any changes), and then click the OK button.

STEP 8

You will now be back at the SIP accounts screen. Click the Close button as shown in the picture below:



STEP 9

The X-Lite software will now attempt to register (login) to our servers. You should see this happen in a few seconds and if successful you will see a screen like this:



If you receive an error message, please verify that your internet connection is working on the computer, and re-verify the settings.

STEP 10

That's it! You can now make a phone call.

You can make a test call to 17771234567, or if you are signed up for one of Callcentric's rate plans you can place a call to a traditional landline or mobile phone by dialing either:
1 + the area code and number for calls to the US
Or
011 + the country code, area code, and number for calls worldwide (you may also use 00 instead of 011).

• A version of Asterisk. This guide was written with Asterisk 1.0.8.
• Callmanager 4.0 or higher. This guide was written with Callmanager 4.1(2)sr1 and some menu options may differ between versions. This will NOT work with Callmanager 3.3(5) or lower.
• Asterisk needs to be integrated with Callmanager using a SIP trunk as detailed Here.

• If a SIP telephone registered to the Asterisk machine acting as voicemail calls through to a Callmanager user and subsequently is sent to voicemail, the call will be dropped. This can be resolved by configuring the device in sip.conf as something like [sipexten] (eg: [sip7222]) rather than [exten] (eg: [7222]).

• MWI
• Voicemail on the CCM side is enabled by selecting Forward to 'Voicemail' rather than forwarding calls to a mailbox specific extension number.
• Messages are accessed by pressing the 'Messages' button on the CCM phones, or dialing the VM pilot number.
• If a CCM user doesn't want to take a call, they can press the iDivert softkey to send to voicemail immediately.
• CCM users can forward all calls to voicemail in the ccmuser pages, or by pressing CFwdAll and entering the pilot number or messages.
• All the standard Asterisk voicemail features work just fine, eg: vm to email.
• etc

• What your voicemail number will be. This guide will use 8888.
• What number will disable message waiting on Callmanager. This guide will use 28888.
• What number will enable message waiting on Callmanager. This guide will use 28889.
• What number will disable message waiting on Asterisk. This guide will use 230XXXX (we have four digit extensions).
• What number will enable message waiting on Asterisk. This guide will use 231XXXX (we have four digit extensions).

• You need to ensure that "Redirecting Number Delivery - Outbound" is checked on your SIP trunk configuration in Callmanager.

Voicemail pilot configuration

• Go to Feature -> Voice Mail -> Voice Mail Pilot.

• Update the pilot.

Voicemail Profile configuration.

• Feature -> Voice Mail -> Voice Mail Profile

MWI configuration

• Feature -> Voice Mail -> Message Waiting

Activate Voicemail

• Activate voicemail on any CCM phones that require it. This is configured in Device -> Phone -> Device Name -> Directory Number.

iDivert configuration

Another thing you should pay attention to is the codec. SIP default setting is G711. You should check the " Intraregion Audio Codec Default  Required Field  " in "Service Parameter Configuration", which is default value "G711/G722  " 

Problem: No matter how I configured xlite, there is 404 error.

Solve: Edit user.conf. Append one row with username=6001

 第十二步：安装Unity License

　　点击Run the Cisco Unity Install License File Wizard

　　下一步

　　选中你的License在Unity万状完毕后会带一个License，位置是C:CommServerLicenseCiscoUnity41.lic，功能极少，基本就是看看用。你可以在这里添加自己买的License。

　　显示你的License包含的内容。

　　第十三步：配置Unity服务

　　点击Run the Cisco Unity Service Confiuration Wizard

　　下一步

　　选择你安装的Exchange版本

　　输入活动目录管理员密码

　　信息存储服务的管理帐户密码就不用输入了，直接下一步

　　本地服务直接使用本地系统帐户就可以

　　确认无误后下一步，完成安装

　　第十四步：配置Unity信息存储

　　点击Run the Cisco Unity Message Store Configuration Wizard

　　输入管理员密码

　　选择Unity系统管理帐户

　　选择你的Exchange版本

　　选择mailbox地址

　　活动目录配置

　　选择创建Subscribers。继续选择管理员帐户，跟刚才一样。然后安装完毕

　　第十五步：设置默认密码

　　这是足可以逼死你的一步，耐心研究吧。点击Run the Password Hardening Wizard

　　下一步

　　设置管理组活动目录密码。动脑筋的时候开始了，设置密码的规则要求超级多，大家可以放大这张图片仔细看。

　　设置管理组的电话密码。这个规则也超级多，发达图片仔细看。

　　设置Subscriber的活动目录密码

　　设置Subscriber电话的密码

　　确认，完成安装

第十六步，让Unity挂上Callmanager

　　点击Run the Cisco Unity Telephony integration Manager

　　点击Create Integration

　　选择Callmanager。你要有别的厂家的设备，比如HP OpenCall什么的，可以选择用SIP连接

　　给这个集成起个名字

　　输入Callmanager地址和TCP端口号，默认端口号2000。如果没有在Callmanager上作改动的话，没有必要更改。可以点击Ping Server测试连通性。

　　设置第二台CCM，跟刚才方法一样。没有的话直接下一步。

　　设置CCM的MWI，使用默认就可以，这个跟你的Unity License有直接关系

　　设置语音端口数，这个也跟你的Lincese有直接关系

　　设置语音Trunk访问代码

　
　　确认配置。确认后会要求重起服务。

　　第十七步：给Unity启用SSL

　　这步可以跳过。建议使用SSL保证安全性，可以选择本地认证或者CA。

　　安装完毕后会给你一个Summary。大功告成了

　　这个是4.0.5的界面，可以正常运行了